Taste The Code

I make weekly videos of electronics, code and general making

Home Assistant-Controlled LED Light with a 3D Printed Base

Learn how to build a stable, Home Assistant-controlled LED light with a 3D printed base filled with plaster for weight, including wiring and smart switch setup.


Exploring the Potential of the CrowPanel ESP32 1.28” Display for DIY Projects

Explore the CrowPanel ESP32 1.28" round display by making a gauge connected to Home Assistant via MQTT. Discover its features, how to integrate it into DIY projects like wearables and smart home setups, and unlock its potential.


Making a Pellet Level Monitor with HC-SR04 and ESP8266

I made a device to tell me the level of the pellets in my pellet boiler that I use to heat the house.


DIY Smart Kettle with scheduling

I modified a kettle to make it smart and be able to schedule it to prepare hot water in the morning when I wake up.


Home Assistant Notifications with WhatsApp - Dumpster Reminder

I created a time based notification in Home Assistant that will remind me to take out the trash every Monday morning.


MQ7 Carbon Monoxide Sensor done the right way!

Many tutorials explain how to use the MQ7 sensor but they all get it wrong in the required power cycling of the sensor


ButtonBot - A DIY solution to automate any switch with Home Assistant

I created a device that can automate any switch with Home Assistant without touching the mains electricity!


Smart irrigation system for my garden

I built a custom irrigation controller that integrates with Home Assistant.


Environment monitor for Home Assistant

I made an environment monitor for Home Assistant by using a NodeMCU and a DHT22 sensor on a custom-made PCB that is powered by 220v.