Taste The Code

Testing the TOOCAA L2 Laser Cutter with a Custom WLED Wall Sign Project

A hands-on review of the TOOCAA L2 laser cutter featuring a DIY project where I build a WLED controlled RGB wall sign from recycled PC motherboards to test its precision and performance.

Oct 17, 2025 — 8 mins read

Batch building 6 Air Quality Sensors

I built multiple of the same device for the first time and this gave me a different perspective on project making!

Jul 15, 2024 — 5 mins read

Testing out different sensor for pellet level monitoring

I tested the VL53L0x sensor to see how it works and if it makes a better choice for pellet level monitoring in my pellet boiler at home.

Apr 26, 2024 — 5 mins read

Soil Moisture Sensor on batteries with ESP-07 running ESPHome - Start to Finish

I created a battery operated sensor for my smart home setup that uses the ESP07 module and a capacitive soil moisture sensor.

Apr 19, 2024 — 7 mins read

Making a Pellet Level Monitor with HC-SR04 and ESP8266

I made a device to tell me the level of the pellets in my pellet boiler that I use to heat the house.

Feb 28, 2024 — 8 mins read

Trail mapping with GPS, ESP32 and microSD card

I made a device that can be used to map out trails in the wild and save the output as KML files on an SD card.

Jan 29, 2024 — 7 mins read

How to design a NodeMCU project board with Altium Designer

I've used Altium Designer to make a project board for the NodeMCU that is powered from AC mains.

Oct 21, 2022 — 2 mins read

No SIM GPS Tracker Using LoRa and Custom Android App

By using LoRa and a GPS receiver, I made a tracker that can work without a SIM card and send out the data to up 8KM.

Jun 29, 2022 — 3 mins read

I made my custom play button award

I made my custom play button award from an old computer motherboard

Jun 18, 2022 — 1 min read

DIY Pellet Burner Controller

I've started making an open-source DIY Arduino based pellet burner controller.

Jun 08, 2022 — 2 mins read

Taste The Code

Testing the TOOCAA L2 Laser Cutter with a Custom WLED Wall Sign Project

A hands-on review of the TOOCAA L2 laser cutter featuring a DIY project where I build a WLED controlled RGB wall sign from recycled PC motherboards to test its precision and performance.

Batch building 6 Air Quality Sensors

I built multiple of the same device for the first time and this gave me a different perspective on project making!

Testing out different sensor for pellet level monitoring

I tested the VL53L0x sensor to see how it works and if it makes a better choice for pellet level monitoring in my pellet boiler at home.

Soil Moisture Sensor on batteries with ESP-07 running ESPHome - Start to Finish

I created a battery operated sensor for my smart home setup that uses the ESP07 module and a capacitive soil moisture sensor.

Making a Pellet Level Monitor with HC-SR04 and ESP8266

I made a device to tell me the level of the pellets in my pellet boiler that I use to heat the house.

Trail mapping with GPS, ESP32 and microSD card

I made a device that can be used to map out trails in the wild and save the output as KML files on an SD card.

How to design a NodeMCU project board with Altium Designer

I've used Altium Designer to make a project board for the NodeMCU that is powered from AC mains.

No SIM GPS Tracker Using LoRa and Custom Android App

By using LoRa and a GPS receiver, I made a tracker that can work without a SIM card and send out the data to up 8KM.

I made my custom play button award

I made my custom play button award from an old computer motherboard

DIY Pellet Burner Controller

I've started making an open-source DIY Arduino based pellet burner controller.

Topics

Search

Tags

Testing the TOOCAA L2 Laser Cutter with a Custom WLED Wall Sign Project

A hands-on review of the TOOCAA L2 laser cutter featuring a DIY project where I build a WLED controlled RGB wall sign from recycled PC motherboards to test its precision and performance.

Batch building 6 Air Quality Sensors

I built multiple of the same device for the first time and this gave me a different perspective on project making!

Testing out different sensor for pellet level monitoring

I tested the VL53L0x sensor to see how it works and if it makes a better choice for pellet level monitoring in my pellet boiler at home.

Soil Moisture Sensor on batteries with ESP-07 running ESPHome - Start to Finish

I created a battery operated sensor for my smart home setup that uses the ESP07 module and a capacitive soil moisture sensor.

Making a Pellet Level Monitor with HC-SR04 and ESP8266

I made a device to tell me the level of the pellets in my pellet boiler that I use to heat the house.

Trail mapping with GPS, ESP32 and microSD card

I made a device that can be used to map out trails in the wild and save the output as KML files on an SD card.

How to design a NodeMCU project board with Altium Designer

I've used Altium Designer to make a project board for the NodeMCU that is powered from AC mains.

No SIM GPS Tracker Using LoRa and Custom Android App

By using LoRa and a GPS receiver, I made a tracker that can work without a SIM card and send out the data to up 8KM.

I made my custom play button award

I made my custom play button award from an old computer motherboard

DIY Pellet Burner Controller

I've started making an open-source DIY Arduino based pellet burner controller.

Topics

Search

Tags

How to Sort Salvaged 18650 Cells with a Battery Tester

Repairing a Vintage 80s SANKEI Boombox: Two Faults Fixed

Building a Better Power Switch for Solar-Powered ESP32 Projects

Can I Fix This Dead Plasma Ball with a Transistor Swap?